Tetsou Japan Inc.

Plumbing Fittings

Elbow

Click the contact us for more inquires.

Bearing

Ball Bearing

Deep groove ball bearings are the most common type of rolling-element bearing, known for their versatility and ability to handle both radial and axial loads in various applications. They feature an inner ring, outer ring, a set of steel balls, and often a cage to keep the balls separated, with deep raceway grooves that allow the balls to roll smoothly while reducing friction.

Mechanical Valves

Gate Valve

Gate Valve works by lifting a gate (a flat or wedge-shaped barrier) out of the path of the fluid. When the gate is raised, fluid flows freely; when it is lowered, the flow is completely blocked. Widely used in Industrial plants, Water Supply Systems and Oil and gas Pipelines.

Control Valves

Check Valve

Check Valves are crucial for protecting equipment that allows liquids or gases to flow only one direction, preventing harmful backflow. Most check valves operate automatically based on pressure differentials and do not require manual control.

Pump

THS Centrifugal Pump

Tetsou Horizontal Stage Centrifugal Pumps convey fluids with centrifugal force using the revolution of the impeller installed inside the pump casing. Centrifugal pumps have long been known as water pumps, and our products have been used for handling low-viscosity liquids at high flow rates and are common in applications like water supply, irrigation and industrial processes.

Mechanical Valves

Ball Valve

A valve in which a ball with a hole through it serves as the valve body. If the direction of this hole is aligned with the pipeline, the fluid can pass through, and if the direction is changed, the fluid is blocked.